• Home
  • Brand
  • Caparol
  • Caparol Spray Plaster FinishCoat - Ready-Mix, Paste-Like, Synthetic-Resin Dispersion Filler/Skim-Coat, Fine For Interior (25 kg Bag)
Caparol

Caparol

Caparol Spray Plaster FinishCoat - Ready-Mix, Paste-Like, Synthetic-Resin Dispersion Filler/Skim-Coat, Fine For Interior (25 kg Bag)

AED 35.70 Ex Tax: AED 34.00
  Seller Info
Availability:   In Stock
Model: Spray Plaster FinishCoat
Brand: Caparol
Ready-Mix, Paste-Like, Synthetic-Resin Dispersion Filler/Skim-Coat, Fine For Interior Product Des.... View More
Qty::
- +


Ready-Mix, Paste-Like, Synthetic-Resin Dispersion Filler/Skim-Coat, Fine For Interior

Product Description:

Caparol Spray Plaster FinishCoat is a pre-mix acrylic-copolymer based, all-purpose filler/skim coat, which is suitable for efficient repairing minor defects, shrinkage holes, small surface cracks and to rectify small irregularities. Caparol Spray Plaster FinishCoat it’s for use as a finishing coat over Caparol Spray Plaster BaseCoat or Caparol Spray Plaster MidCoat, applied as a thin layer. It is also suitable as a surfacer to achieve smooth plaster and concrete surfaces; and for levelling and equalizing unevenly textured fine render/plaster coatings or concrete. Also suitable to achieve finely textured surfaces using spatter effect technique on smooth, filler treated walls and ceilings. When used for finishing ceilings, the final coat may be left spray textured, in which case no further decoration is required. Surfaces leveled with Caparol Spray Plaster FinishCoat can be coated, when fully cured/dried, with suitable Caparol emulsion and latex paints or acrylic enamels, may be without previous priming. Caparol Spray Plaster FinishCoat is not suitable to be use on EIFS/ETICS. Maximum coating/layer thickness per work step: 0.6 mm

Recommended Use:

Without priming coat suitable for:
- Cement plastered walls and ceilings
- Hollow concrete blocks
- Concrete and precast concrete
- Rendered fair-faced and levelled brick masonry

With necessary priming coat particularly suitable for:
- ACC/cellular concrete
- Sandwich-type plasterboards
- Stable existing coatings
- Fibrous cement sheets

Not suitable for damp locations or on uncovered and open exterior surface areas, e.g. facades!
For damp locations it’s recommended to use Capatect ArmaReno 700 or other suitable mineral based plaster/filler.
For open exterior surface areas we recommend to us CapaFilex or suitable mineral based plaster/filler.

Advantages:

- Water-dilute able, ecologically compatible
- Low odour, non-toxic, emission-minimised and solvent-free
- Excellent adhesive strength with high coverage
- Rigid/stiff, when thoroughly cured
- Non-shrinking, low-sagging and do not flake off
- Can be sanded in dry condition and felted in wet condition
- Quick drying and diffusion-capable
- Non-flammable
- Ready to use
- Easy to apply and easily sand able

Physical Properties:

Volume Solids                              53±2%
Particle Size                                 Maximum 0.3 mm
VOC                                             6.3 g/litre
Specific Gravity                           1.8 g/cm3
Colour/Gloss                                White / matt
Finish                                           Fine - smooth & texture, depending to preferred design
Thinner/Cleaner                           Potable clean water
Packing Size                                25 kg PE bag (sturdy bag)
Shelf Life                                     12 months

Technical Datasheet

( 0 ) Customer Reviews

Leave a Review

Your email address will not be published. Required fields are marked *