<strong>Low viscosity epoxy injection resin system</strong><br />
<br />
<strong>Uses:</strong><br />
<br />
For injecting into cracks in concrete or masonry, to form a permanent bond or seal.<br />
<br />
<strong>Advan ...
<strong>Flexible polyurethane injection resin system</strong><br />
<br />
<strong>Uses:</strong><br />
<br />
For injecting into cracks in concrete or masonry, either wet ordry to form an elastic seal. When used in conjunction with Nitofill WS60*& ...
High strength self-smoothing underlay
Uses:
Provides an economical method of levelling floors prior to laying epoxy screed, toppings or coatings such as Nitoflor FC140*†, Nitoflor FC150*† and Nitoflor SL2000*†.
Advantages:
- Cost effective
- High strength
- Quick and easy to lay
- Sea ...
<strong>High strength trowel grade, epoxy resin fairing coat, repair mortar, bedding and adhesive</strong><br />
<br />
<strong>Uses:</strong><br />
<br />
Nitomortar FC is designed for application to minor imperfections in concrete surfaces. It is ...
Epoxy resin fairing coat and blow hole filler<br />
<br />
<strong>Uses:</strong><br />
<br />
Nitomortar FC(B) is designed for application to blow holes and surface imperfections in concrete surfaces. It is suitable for application in thicknesses greater than ...
<strong>Fair faced, one component polymer modified cementitious filler and reprofiling mortar</strong><br />
<br />
<u><strong>Uses:</strong></u><br />
<br />
Renderoc BF is designed for application to imperfections in concrete and maso ...
<strong>Two component polymer modified cementitious blow hole filler</strong><br />
<br />
<u><strong>Uses:</strong></u><br />
<br />
Renderoc BF2 is designed for application to imperfections in concrete and masonry surfaces. It is suit ...
Single component polymer modified cementitious pinhole filler<br />
<br />
<u><strong>Uses:</strong></u><br />
<br />
Renderoc FC is designed for application to minor imperfections in concrete and masonry surfaces. It is suitable for application in ...
Shrinkage compensated, polymer modified, fibre reinforced, thixotropic repair mortar system
Uses:
Renderoc HS is suitable for sprayed or trowelled applica- tions, with high build characteristics. Typical applications would include, but not be limited to, the following:
- All types of structur ...
<strong>Single component free flowing low alkali micro concrete</strong><br />
<br />
<strong>Uses:</strong><br />
<br />
The high fluid nature of Renderoc LA obviates the need for compaction and vibration and are most suitable for:<br />
- ...
<strong>Shrinkage controlled, polymer modified, cementitious, high specification repair mortar system</strong><br />
<br />
<strong>Uses:</strong><br />
<br />
Renderoc HSXtra is suitable for hand and spray application for repairs where high load b ...
<strong>Crack injection resin for stopping water flow</strong><br />
<br />
<strong>Uses:</strong><br />
<br />
For injecting into cracks in concrete to temporarily stop the flow of moving water. When used in conjunction with Nitofill UR63*&dag ...
<strong>General purpose non-shrink cementitious grout</strong><br />
<br />
<strong>Uses:</strong><br />
<br />
Conbextra GP general purpose grouting is used where it is essential to eliminate shrinkage when completely filling the void between a ba ...
