Trafficguard Top Coat - Top Coat for Traffiguard System (18 Litre - 2 Components)
Epoxy Polyurethane based Hard wearing, skid resistant, flexible Top Coat for Traffiguard System
Uses:
Provides a high grade protection system, to trafficguard flooring system exposed to aggressive environments.
Advantages:
- Flexible and bridges dynamic cracks
- Suitable for all zones in a car park
- Seamless and watertight
- Rapid application, reliable and safe
Description:
Trafficguard Top coat is a high quality, polyurethane, protective coating which is applied as a topcoat in trafficguard floor system. It is supplied as a two pack material in pre-weighed quantities ready for on-site mixing and use.
Apply Trafficguard Topcoat to the primed surface at an application rate of 0.2 to 0.5 ltr/m2 per coat. For best results the Trafficguard Topcoat should be applied with a short haired lambswool roller. General recommendation which will vary according to the project is a minimum coverage rate of 0.2 ltr/m2 for parking and thoroughfare; 0.5 ltr/m2 for ramps.
Prior to trafficking allow the following cure periods:
Foot traffic : 24 hrs @ 25°C or 18 hrs @ 35°C
Vehicle traffic : 5 days @ 25°C or 72 hrs at 35°C
Traffic marking lines may be applied using Trafficguard Line Marking Paint (TLMP) after five days from time of application.
Technical Datasheet
Safety Datasheet (Base)
Safety Datasheet (Hardener)
Leave a Review
Your email address will not be published. Required fields are marked *